Salt Spray Test Machine, Salt Spray Chamber is a standardized and popular corrosion test method, used to check corrosion resistance of materials and surface coatings. Usually, the materials to be tested are metallic and finished with a surface coating which is intended to provide a degree of corrosion protection to the underlying metal.

Features:

Machine Material:

(A) testing room using PVC polyvinyl chloride plate (from Taiwan), acid-resisting and alkali-resisting, cleaning easier.

(B) cover of testing room using acrylic panels (imported organic glass), the thickness is 5mm.

(C) reagents added bottles attached with water gauge, cleaning easy and not easy to break.

(D) saturated air barrels is made of SUS # 304 stainless steel.

(E) testing room to adopt indexing frame, can be arbitrarily adjust the angle, Surrounded by fog and placed more piece.

(A) Salt spray test: NSS, ACSS

1. Testing room : 35 ? ± 1 ?

2 Saturated air barrels : 47 ? ± 1 ?

(B) Anti-corrosion test: CASS (copper acetate)

1. Testing room: 50 ? ± 1 ?

2. Saturated air barrels: 63 ? ± 1 ?

3. Air supply system: air pressure 1Kg/cm2 Two-stage adjustments (coarse / fine-tuning).

(A) The first paragraph for the rough adjustment 2-2.5Kg/cm2, the second paragraph to fine-tune 1Kg/cm2.

(B) Testing configuration is switch connector designed for SO2.

4. Spray form:

(A) Using Bo Nute principle to draw brine and then saline spray, atomization uniform, non-blocking and crystallization, so that ensure continuous spraying.

(B) Nozzle: The nozzle is made of special glass, adjust spray volume and spray angle.

(C) spray volume: Adjustable 1 ~ 2ml (80cm2/hr) (average of 16-hour volume).

5. Heating Devices:

By direct heating, warming up faster and reduction of standby time, when the temperature arrives automatically switch ON / OFF, make temperature accuracy, low power consumption (heating tube is made of titanium alloy).