Student table: size 160*80*75cm, there is a drawer on each side of the table with sockets and components retaining panel in it. The middle drawer is to keep tools, multi-meter, wires, instructions, etc. On the table, a general circuit board is laid in the middle, which is size of 150*70cm. There is four lines of sockets, which can be used to connect the components and electric appliances in required circuits.

This equipment is to be used in technical schools, vocational schools and colleges for 228 electric experiments include diode and triode circuit, sine oscillation circuit, DC coupling amplifier and integrated operational amplifier circuit, DC power, controllable silicon and trigger circuit, digital circuit and others. 

Components and Sockets: as a basic component in the circuit, it has component code, component, powered socket and injection mold testing hole. It is to be used with general circuit boards. Student can connect components with the socket to form a circuit. It needs no welding at all. It is very easy to change the circuit or its component parameters.

Tape General Electric Experiments Table (Referred to as experiment table):

Power Input:

There is three-phase four-wire and ground-wire input back the experiment table, and also equips power leakage protection switch (general power switch), three-phase indication lamps, voltage meter, current meter for testing the three-phase power.

Function signal generator (sine wave, square wave, triangular wave)

Frequency Range: 5Hz-550KHz

Power Output:

Group A: three-phase four-wire output connects socket “W, V, U, N, Ground” and a three-phase four-wire socket of 380V, 3A.

Group B: adjustable AC power, AC output current 1.5A, voltage 3-24V in seven ranges and a current meter indication.

Group C: DC regular voltage adjustable power: current 1.5A, continuous adjustable voltage 1.25-24V, voltage and current meter indication.

Group D: DC regular voltage power, current 0.5A, continuous adjustable voltage 1.25-24V, voltage and current meter indication.

Group E: DC regular voltage power, current 0.5A, voltage 5A, current meter indication.

Group F: single phase AC commercial power output 3A, for connecting external instruments and equipment.