Tenders Description & Specification for Experimental Flume 309x450mm
Experimental Flume 309x450mm
The inclination of the experimental flume can be finely adjusted to allow simulation of slope and to create a uniform flow at a constant discharge depth.
A wide selection of models, such as weirs, piers, flow-measuring flumes or a wave generator are available as accessories and ensure a comprehensive programme of experiments. Most models are quickly and safely bolted to the bottom of the experimental section. All components that come into contact with water are made of corrosion-resistant materials (stainless steel, glass reinforced plastic). The inlet element is designed so that the flow enters the experimental Section with very little turbulence.
The experimental flume with a closed water circuit has a cross-section of 309x450mm. The length of the experimental section is between 5m and – with further extension elements a maximum of 12,5m. The side walls of the experimental section All made that tempered glass, which allows excellent observation of the experiments.
Technical details:
Basic principles of open-channel flow
Smooth adjustable inclination of the experimental section
Experimental section with 20 evenly spaced threaded holes on the bottom for installing models or for water level measurement using pressure
Experimental flume with experimental section, inlet and outlet element and closed water circuit
Length of the experimental section 5m, up to 12,5m possible with additional extension elements
All surfaces in contact with water are made of corrosion-resistant materials
Flow-optimised inlet element for low-turbulence entry into the experimental section
Side walls of the experimental section are made of tempered glass for excellent observation of the experiments
Experimental section with guide rails for the possible available instrument carrier
Closed water circuit with 2 water tanks, pump, electromagnetic flow sensor and flow control
Models from all fields of hydraulic engineering available as accessories
2 tanks
Made of GRP
1100L each
Measuring ranges
Flow rate: 5,4…130m3/h
400V, 50Hz, 3 phases
400V, 60Hz, 3 phases
230V, 60Hz, 3 phases
Ltekonline are the manufacturers of Experimental Flume 309x450mm used to demonstrate engineering principles in Engineering Colleges, Engineering Schools and Fluid Mechanics Teaching Equipment for Engineering Teaching Lab in Universities