Machines for textile tensile testing are typically low force, high elongation, constant rate of elongation or load and are table-top systems. Tensile testing of textiles provides the strength and elongation properties for both natural and manmade materials, such as cotton, carbon, polyester, nylon, glass and graphite. Textiles can be tensile tested in many forms, including single strands, yarns, webbing, woven, braided material and nonwoven fabrics. For a strip test, the grips clamp a strip of fabric using jaws wider than the sample width. For both tests, grip the specimen inside the ends of the sample length. The majority of textile fabric tensile testing is performed as either a grab test, in an effort to eliminate edge effects, or a strip test, including edge effects. For a grab test, the grips clamp a fabric sample in the center using jaws smaller than the sample width. 

Specifications:

Capacity: 10,20,50,100,200kg (optional)

Precision: Within ±1%

Effective Max stroke: 800mm

Speed input: Knobs

Test speed: 1~500mm/min

Display mode: PC

Switching unit: Kg, lb, N

Degree of disintegration: 1/250,000

Data sampling frequency: 10HZ

Motor: Servo Motor + High Precise Ball Screw

Power supply: 1phase ,220V ,50Hz (110V is available)

Weight: 90kg.