The fluid circulating in the pipe is subjected to frictional forces resulting in energy loss and overall pressure drop. There is a distinction between conventional pressure losses due to friction on the walls, which vary according to the obstacles the fluid encounters. The flow of fluid can be observed through transparent tubing, and laminar and turbulent phenomena of fluid can be observed by injecting dye for treatment. The Workbench for Fluid Dynamics studies can highlight pressure losses at these various points. The workbench is equipped with a differential pressure sensor and a pressure sensor, and the pressure value can be observed through the display screen. 

Features:

The training device uses a steel frame as a whole, the exterior is sprayed with anti-corrosion treatment, and the bottom is equipped with a universal wheel for easy movement.

Performance Parameters:

Power: 500W

Flow meters: 30-300l/h and 300-3000 l/h

Plexiglass tube: diameter 20mm and 25mm

PVC pipe: diameter 20mm

Elbow 30°, 45°, 75°, 90° and 135°

Centrifugal pump: Power: 370W Speed: 2900 r/min Maximum flow 3m³/h Maximum lift: 20m

Working conditions: Ambient temperature 5??+40? Relative humidity ?85%?25??

Input power: AC220V±10% 50Hz

Dimensions: 2000mm×800mm×1900mm.