High melt flow rate instrument meter, used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR/MVR value, it is suitable for high temperature of polycarbonate, aromatic sulfone, ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, fluorine plastics, nylon engineering plastics, can also be applied to polyethylene (PE), polystyrene (PS), polypropylene (PP), widely used in plastic production, Plastic products, petrochemical and other industries as well as relevant colleges and universities, scientific research units and commodity inspection departments.

Technical specifications:

Temperature fluctuation: ±0.2?

Temperature uniformity: ±1?

Temperature display resolution: 0.1?

Temperature range: 40?-450?

Temperature drift: 4 hours  ≤0.5?

Temperature uniformity of 10mm-70mm above the die: ±0.5?

Time display resolution: 0.1s

Spin the sample time: 1~999S, can set on the touch screen

Displacement measurement accuracy: 0.01mm

Displacement measurement encoder:: photoelectric rotary encoder

Quality test range: 0.1-150g/10min

Volumetric test range: 50-800cm3/10min

Output mode: micro automatic print output

Cutting mode: manual or automatic cutting

Test load: 8 classes, 8 sets of weights

Mouth mold diameter: Φ 2.095 ± 0.005 mm or Φ 1.05 mm± 0.005 mm(optional)

Outlet length: 8.000±0.025mm

Charging cylinder diameter: Φ 9.474 ±0.007 mm

Length of piston rod: 6.35±0.13mm

Diameter of charging barrel: Φ9.550±0.007mm

The weights accuracy: ±0.5%

Power supply: AC220V±10% 50HZ.