This machine is suitable for twisting durability test, such as mobile phone, PDA, MP3, telephone and so on.

The mobile handset is not installed on the packaging, batteries, not boot fixed on the twisting test machine, both ends of each clamping 15mm, applying a large equivalence does not exceed 2N.m, the frequency of 15-30 times per minute, total distortion 500, after taking the function, small is not less than 0.5N.m of torque clockwise counterclockwise twist and twist each alternate, appearance and assembly inspection shall comply with the requirements of relevant standards for hand-held folding, sliding and rotating structure, the testing shall be carried out in the closed state.

This machine is used to detect the mobile phone torsion test, using PLC and HMT control system, you can set torque value to test the number of turns, after life, to see whether the function of the phone is normal, positive and reverse count once. The touch screen display is easy to operate.

Technical Parameters:

Distortion range: 0.5Nm - 3Nm

Torque display: 4 bit LED

Drive mode: electric drive mode

Test cycle: 1~30 times / min.

Control function: digital set motor speed and torque

Precision 0.075Nm

Function: counting value to stop and stop

The count value 8 LCD display, and 1 to 99999999 arbitrarily set

Test piece number: 1 (mobile phone specifications: length -120mm, width -80mm, thickness -35mm)

Machine size: about 600*350*450mm

Working voltage: 220VAC50HZ.

Machine Characteristics

The LCD touch screen +PLC is used to control the distortion program, and the Chinese interface is easy to operate;

Servo motor drive, accurate positioning, smooth torque output, low noise;

The torsion life tester is suitable for twisting test of electronic products, and can be twisted clockwise and anticlockwise to detect the anti distortion performance of the shell and inner structure of mobile phone.

Special adjustable mobile phone quick clamping fixture, mobile phone test.