Tenders Description & Specification for Re-Sharpening Machine
Re-Sharpening Machine
- Make sure the material of drill and choose suitable grinding wheel.
- Standard iis CBN grinding wheel.* CBN wheel is suitable for HSS drill, SD wheel is suitable for carbide drill.
- Set left scale annulus to be “0” position. Turn the scale clockwise to the end, then contrarotat to adjust to the “0” position.
- Choose suitable collet to the collet holder. (Insert the collet into holder in the 45 degree)
- Follow up the steps for setting up the drill to the collet holder, without tighting. Keep the room for adjusting the drill.
- Adjust the left scale to meet the diameter of the drill.
- Insert the collet holder with the drill into the left hole and completely touch,then turn right to set up.
- Insert the top of drill into the end, turn right to set up.
- Tight the drill by collet holder for setting up the grinding position.
- Take out the chuck
Grinding range |
Ø2.1-Ø13(Ø15) |
(Ø8)Ø13-Ø26(Ø32) |
Point Angle |
100° (95° )~135° |
95° ~135° |
Power |
AC220V |
AC220V |
Motor |
180W |
250W |
Speed |
4800RPM |
4800RPM |
Grinding wheel |
CBN(HSS)orSD |
Dimension |
32x18x19cm |
46x24x22cm |
Weight |
10kg |
27kg |
Ltekonline are the manufacturers of Re-Sharpening Machine used to demonstrate engineering principles in Engineering Colleges, Engineering Schools and Workshop Machines and Tools for Engineering Teaching Lab in Universities