The Stirred Tank With Double Jack Stand Coil is part of a series of units enabling experiments to be performed on different heat exchanger types. The experimental unit is ideally suited for investigating the functioning and behavior of a stirred tank with double jack Stand coil in operation.

The Stirred Tank With Double Jack Stand Coil is connected to the supply unit using quick-release couplings. The jacketed stirred tank is fitted with a coiled tube. In heating mode with jackSTthe hot water flows through the jack Stand transfers a part of the thermal energy to the In heating mode with coiled tube the hot water flows through the coil and heats the cold water in the tank. A stirring machine can be used in all modes. Valves on the supply unit are used to adjust the flow rate Of hot water.

In many engineering processes, several basic operations are combined. For example, in a tank a chemical reaction takes place during which heat is to be supplied or removed. Such tanks are equipped with jackSTor a coiled tube. The product temperature at an even temperature distribution is precisely adjustable. Here, the stirred tank with double jack Stand coil is a model for such tanks. In the jackSTor in the coiled tubing is used for heating or cooling of the tank content. For a better mixing of the tank content and an even temperature distribution stirring machines are used. 

The temperature sensors for measuring the in Stand outlast temperature are located at the supply connections on the Stirred Tank With Double Jack Stand Coil. An additional temperature sensor measures the temperature in the stirring tank.

During experiments, time curves are plotted and displayed graphically.

Technical data

Stirred tank

Nominal capacity: approx. 1200mL

Heat transfer surface

JackST(stainless steel): approx. 500cm2

Coil (stainless steel): approx. 500cm2

Stirring machine

Speed: 0…330min-1

Measuring ranges

Temperature: 0…100°C.