Melt Flow Index Tester, Plastic Melt Flow Rate Test Instrument used to measure the thermoplastic resin melt mass flow rate (MFR), melt flow rate (MVR) volume and the density of the melt, it is not only applicable to the high melting temperature of polycarbonate, nylon, fluorine plastic, aromatic sulfones engineering plastics, also applies to polyethylene, polystyrene, polypropylene, ABS resin, poly formaldehyde resin with lower melting temperature, such as plastic test, widely used in plastic raw materials, products, petroleum and chemical industries, and related colleges and universities, scientific research units and the commodity inspection department.

Features:

Tester compact structure, beautiful, the control system can real time measurement and display temperature numerical, has the upper limit temperature protection, constant temperature sound reminders, response time tip etc. 

Using advanced electronic measurement technology, liquid crystal display test results, the micro printer output results and calculating the quality of the melt flow rate (MFR) or melt volume flow rate (MVR) (note: single determination value and many times the average of the cutting material).

Cheap 380V Customized Tablet MFI Tester can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber, resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined.

Function. The use of advanced PID control technology and high speed and high resolution sampling circuit, make the machine in constant temperature is the following characteristics:

A: heating speed, the dinky overshoot.

B: constant temperature and high precision.

C: in the packing after, can quickly restored constant temperature condition.

Main Parameters:

MFR test range: 0.1-150g/10min

MVR test range: 50-5000cm3/10min

Accuracy: ±0.2°C

Output: Mini printer

Measuring range: 0~30mm

Size of barrel: Diameter: 9.55±0.025mm ; length: 160 mm

The piston head diameter: 9.475±0.01 mm

Temperature display resolution: 0.1°C

Inside diameter of die: 2.095 mm; length 8±0.025 mm

Temperature range: room temperature~450°C

Power: 220V±10% 50HZ.