Main Features:
Significantly improved ECU performance and innovation.
Clarity in results with the 3rd Generation Integrated Multi Axis Control System (IMACS2).
Fully integrated and compact in design, a perfect solution for both static and mobile testing facilities.
The new Hydraulic Power Supply (HPS) uses inverter technology coupled with a high performance labyrinth bearing actuator to deliver 19 kN of force.
All-in-One computer control with the latest All-in-One touchscreen PC technology.
Easy-to-use and ergonomic testing system.
Interchangeable transducers and load cells with "plug and play" signal conditioners allowing for quick and easy transition of test set-ups.
Optional air compressor that comes integrated.
Technical Specifications
Load Capacity: Static: 19kN, Dynamic 17kN
Actuator Type: Labyrinth Bearing
Frequency Range: 0.01 to 70Hz sinusoidal loading
Actuator Stroke: 30mm (+/- 15mm stroke)
Specimen Size (dia xh): 100 x 150 mm nominally, 50 x 135 mm, 38 or 50 x 110 mm
Cell Dimensions (dia xh): 270 x 390mm
Confining Pressure: 0 to 225 kPa
Air Compressor and Dryer: Low noise, integrated, automated operate-on-demand (optional)
Easily interchangeable load cells test
Noise Level: Less than 70db at 2m
Computer Control: Integrated all-in-one PC touchscreen (optional)
Supplied complete with high quality pre-filtered oil for longer life
Temperature Range: -10 ° C to + 70 ° C *
Cooling Rate: Typically cools to + 4 ° C in under 30 minutes (at an ambient temperature of + 23 ° C)
Temperature Accuracy: +/- 0.2 ° C (at temperature probe placed close to the specimen)
Dimensions (hxwxd): 1,359 x 1,350 x 739mm
Weight: 275kg (including oil)
Transducers
Load Cell: Low profile pancake type
Pressure: 0 to 225 kPa
Built-in LVDT Actuator: 30mm Stroke
Temperature Probe Range: from -25 up to +80° C
Plug-and-Play: Up to 4 interchangeable on-specimen displacement transducers, plus easily interchangeable load cells
On-Specimen Displacement: 3 clips on +/- 0.5mm LVDTs Compatible with up to 4 (Various optional loose-core, strain gauge transducers available)
Services
Power (with air compressor): 220V–240V, 50Hz, single phase, 22A 208V, 60Hz, single phase, 25A
Power (without air compressor): 220V–240V, 50Hz, single phase, 17A 208V, 60Hz, single phase, 20A
Hydraulic Oil: Pre-filled with high specification pre-filtered, ISO 46 Premium Mineral Oil
Air: Clean dry air at 450-800kPa; 2 L/sec (Optional integrated air compressor available)
Control & Data Acquisition—IMACS2
Configuration: Fully integrated
Real Time Digital Computer Control: 32-bit Processing
Acquisition Speeds: 200kHz (simultaneous on all channels)
Data Over-Sampling: At least 4x
Analogue Outputs: 8 BNC connectors for raw data logging
Control: 2 axis control (actuator and confining pressure)
Data Resolution: 24-bit auto-ranging data acquisition
Communication: Ethernet at 10/100Mb/s, Ethernet at 1Gb/s
Analogue Inputs: Auto-calibrate on power up
Acquisition: Up to 8 Channel data acquisition (actuator displacement, axial load, 3 to 4 on-specimen displacement transducers, confining pressure and temperature)
Ltekonline are the manufacturers of Asphalt Mixture Performance Tester used to demonstrate engineering principles in Engineering Colleges, Engineering Schools and Asphalt Mix Testing for Engineering Teaching Lab in Universities
