Tenders Description & Specification for Fluid Flows Study Bench
Fluid Flows Study Bench
The process principle diagram of measuring point location: 1. 2 ball valve is used to select the measuring section and 3 reflux; P pressure, f flow
Four straight pipe elements are installed on the panel. These can be selected individually by the ball valve, flow control valve into use and yield and rotor flow meter reading.
The pressure measuring points in the piping system are designed as annular cavity, which is located between the beginning and end of the measurement part, ensuring accurate pressure measurement. The sensor is connected to a differential pressure gauge and corresponding to the differential pressure reading display.
The pressure loss is directly dependent on the surface roughness of the inner wall of the pipe, which is used in the material. In addition, the pressure loss is caused by flow velocity and cross sectional area. As the water flows through the pipe, the friction of the pipe wall and water causes the pressure loss.
The well-structured teaching materials provide a step-by-step guide through experiments.
Learning goals/experiments:
Effects of various pipe diameters
Effects of different materials and surfaces roughness
Research on pipeline pressure loss
Different sections
The impact of velocity
The comparison between experiment and theory feature
Pipe 1 pressure loss
Different materials and diameters
The study bench allows the study of the linear and specific load losses and the water flow visualization in different pipes’ types:
Section increase and restriction.
Industrial elbows.
Smooth tube.
Rough tube.
Venturi tube.
The bench is composed of:
Fluid supply reservoir in non-oxidizable material.
Stainless steel Centrifugal pump with filter.
Tight and separate connections installed in different measurement points.
Direct display differential manometer.
Section increase and restriction.
Flow sensor.
Different control valves.
Venturi tube.
Transparent smooth tube.
Different industrial elbows.
All the necessary accessories assuring the efficient functioning.
Power supply: 220V/380V/50Hz.
Ltekonline are the manufacturers of Fluid Flows Study Bench used to demonstrate engineering principles in Engineering Colleges, Engineering Schools and Fluid Mechanics Teaching Equipment for Engineering Teaching Lab in Universities
