This hydraulic training device adopts the open structure operation panel design according to the syllabus requirements of mechanical and electrical integration of colleges and universities for gas, electricity and hydraulic control, combined with the advantages of pneumatic relay control and hydraulic relay control experimental equipment. Various hydraulic components can be flexibly installed on the operating panel. All joints adopt open-close quick joints at both ends, which solves the problem of oil leakage in the hydraulic circuit, is convenient and durable, reduces losses and also helps maintain environmental sanitation. Arbitrary combination of various components to form a hydraulic system with certain functions, with strong practicality.
Features
The equipment is composed of a high-strength sheet metal frame, which is beautiful and durable. The bottom is equipped with universal wheels for easy movement; equipped with a cabinet for storing tools and devices, and the hydraulic station is integrated in the lower part of the equipment; various hydraulic valve blocks are fixed The substrate adopts special substrate profiles, and the groove interval of the panel is 25mm, which can easily plug various components on it; the upper part of the electronic control hanging box is placed, the whole is compact.
Equipped with industrial series hydraulic valves, the maximum working pressure can reach 35Mpa. Each hydraulic component is equipped with an oil circuit transition base plate, which can be conveniently and freely placed on the panel. The oil circuit lap connection adopts open-close quick-change joints, which is convenient for disassembly and connection, does not leak oil, reduces loss and also helps maintain environmental sanitation.
Performance parameter
Input power: AC: 220V
Experimental table size: 1650 (length) × 700 (width) × 1800 (height)
Aluminum alloy panel size: 1200 (length) × 750 (width)
Groove interval: 25mm
Specifications: Cabinet: 1
Desktop structure: 1
Casters with split grooves: 4
Safety limit speed range: 1000-1500 rpm
The noise at a distance of 1.5m from the hydraulic platform when the hydraulic pump is working is less than or equal to 58dB0
Demonstration experiment requires only 4-6Mpa for fluid flow pressure
Fuel tank: Nominal volume 35L
Electric control unit
The electrical control unit includes a master control switch hanging box, a DC power supply hanging box, an emergency stop hanging box, a relay hanging box, and a button hanging box.
Training platform
The training platform is composed of aluminum profiles and aluminum alloy substrates, which can be moved and positioned flexibly. The actuator control box is installed on the base plate, which is beautiful and generous.
Power configuration
Single-phase three-wire power input, protected by insurance, is equipped with a main power switch. In an emergency, turn off the main power switch to stop the execution object.
Hydraulic Components
Picture, model and Chinese name of hydraulic components.
Balance valve DC6G-1-10B/50/2
Diaphragm accumulator:
3-way pressure regulator:DR6DP-50/75
pressure relief DBDH6P/100
flow control valve DV8/1
1 unit shuttle valve double nonreturn valve, delockable 4WE6J-6X /ED24V
6/3-way proportional units: hand lever valve
loading unit / cylinder
loading unit / cylinder
pressure compensator for open center load sensing:
hydraulic motor
anti-shock unit and anti-cavitation block:Direct-acting relief valve DBDH6P/100
4/3-way hand lever valve:4WMM6D50B/
Electronics pressure switch:Setting method:

Ltekonline are the manufacturers of Hydraulic Training Bench Mobile used to demonstrate engineering principles in Engineering Colleges, Engineering Schools and Hydraulic Trainer Kit for Engineering Teaching Lab in Universities