All the information/data can be stored (test conditions, load displacement curves, life curves and check report etc. On the keyboard, screen, display, pad multipoint pressure automatic measurements and rebound. This tester is suitable for various stress tests. set coordinates, then do test automatically, record and display the test values.

Features:

Can be arbitrary input coordinates X,Y axis, the machine automatic move test.

Can set test stroke, when it reaches the setting value, tester  will pause or return.

Can be directly tested and copy each trip point(0.01mm) and the load of the graphics.

Can input Max test stroke and load, Computer system automatically control and test.

Can set load, when value reaches the setting value, tester will pause or return.

Print and stored on the hard disk(each stroke curve, the life curve, inspection reports).

Test data are stored on the hard disk(each data can be stored, unlimited)

Inspection report can be archived to Excel editor or directly through the network output.

Inspection report up content can be modified at any time.

Each measurement, graphics are available by the cross cursor tracking trajectory, interpretation of corresponding load and travel value, minimum 0.01mm.

Test condition is all in the computer screen set(including test load, stroke, speed, frequency, air compressor, pause time, etc.).

Specifications:

Transmission Structure: Ball spiral welding

Minimum trimming distance: 0.01mm

Max. Movement range for X-axis: 400mm

Max. Movement range for Y-axis: 250mm

Max. Movement range for Z-axis: 100mm

Max speed in X/Y-axis: 500mm/min

Max speed in Z-axis: 200mm/min

Voltage: AC220V

Load cell: 1Kgf or 2Kgf or 5Kgf 

Load minimum read value: 0.01g

Probe specifications: Individual sensors correspond to diameter of 2, 4, 6, 8, 10mm

Size: 650mm(L)*850mm(W)*900mm(D)

Weight: 100Kg.