Tenoner has two separately powered heads which enable both sides of the tenon to be cut in one pass, the shoulders being offset if required. The heads are each equipped with 4 replaceable shear-cutting knives, two spur cutters for clean shouldered tenons, a mechanical digital readout on the head and are powered by two 2.2kW Motors. An additional third 4kW motor is provided to drive a scribing head for accurately scribed individual mouldings. A scribing head is an optional extra.

Chain and Chisel mortising machine provided the most rapid method of producing a perfectly clean and true mortise at one stroke by means of the endless chain cutter of chisel. The head stock is suitable counter balanced for smooth and easy working. The table is compound slide for lateral movement by screw adjustment and longitudinal traverse by hand wheel provided with quick action screw clamp for holding the timber adjustable stops are provided to control the length and depth of motorised and having the following specifications.
Indigenous make floor model motorised chisel motorising (square holes drilling) machine ideally suitable for making square holes in wooden article such as doors, windows, etc., equipped with 1/2 HP AC 440/3/50 2800 RPM electric motor, starter, tool holder with 19 mm bore, working table size 765 mm x 150 mm having longitudal travel 300 mm cross travel 115 mm max. travel in vertical direction 425 mm approx. weight 250 Kgs.

Table size 455x 150/18″x6″mm/inch
Max. height of workpiece on table 254/10″
Max. height of door or frame 1000/39″
Max. depth of cut-chain mortiser 140/51/2″
Max. depth of cut-chisel mortiser 90/31/2″
Longitudinal movement of head/table 305/12″
Table tilt-degree 45
Size of dust collection port-dia. 100/4″
Air pressure required (kg/cm2)     5 to 7
Electric motor (hp/rpm) 2/1440

Diameter of Tooling Bottom Block 175 mm
Diameter of Tooling Scribing Head 210 mm
Diameter of Tooling Top Block 175 mm
Dust Extraction Outlet     150 mm
Horizontal Adjustment Scribing Head 30 mm
Horizontal Adjustment Top Block ±32 mm
Length of Shaft 75 mm
Main Cutter Heads 2 @ 175 mm x 60 mm
Max Length of Tenon Single Pass 155 mm
Max Length of Tenon Two Passes     205 mm

Nett Weight 470 kg
Overall L x W x H  1,320 mm x 1,020 mm x 1,560 mm
Rating Industrial
Scribing Head Shaft Diameter 30 mm
Table Size 800 mm x 310 mm
Timber Cap’ Height Fence @ 45 130 mm
Timber Cap’ Width Fence @ 45 195 mm
Timber Cap’ Width Fence @ 90 310 mm
Vertical Adjustment Bottom Block 0 mm – 60 mm
Vertical Adjustment Scribing Head 95 mm
Vertical Adjustment Top Block 0 mm – 100 mm

Ltekonline are the manufacturers of Wood Working Mortiser Tenoning Machine used to demonstrate engineering principles in Engineering Colleges, Engineering Schools and Workshop Machines for Engineering Teaching Lab in Universities